Titanium Grade 2 CP 3: forms, specifications and uses
Titanium Grade 2 CP 3 | UNS #R50400 is generally known as the workhorse of the Commercially Pure Titanium grades and is therefor unalloyed.
Titanium Industries offers Titanium Grade 2 CP 3 | UNS #R50400 is generally known as the workhorse of the Commercially Pure Titanium grades and is therefor unalloyed. Because of its varied usability and wider availability, the metal has become used in many markets and applications. Grade 2 shares many similar qualities to Grade 1 Titanium, including corrosion resistance. Grade 2 is stronger, however. Due to higher levels of iron and oxygen, Grade 2 Titanium possess high strength, good formability and weldability, and ductility. These traits makes Grade 2 Titanium Bar and Sheet a primary choice for a wide variety applications. Commercially Pure or CP titanium in unalloyed. Grade 2 has higher levels of iron and oxygen than other CP grades, which offers excellent formability and moderate strength with superior corrosion resistance. CP Grade 2 titanium is widely used in heat exchangers. CP2 is one of the most common titanium grades, with properties that make it a good candidate for chemical and marine, aerospace and medical applications. Mill Products: Titanium Grade 2 CP 3 Round Bar, Titanium Grade 2 CP 3 Plate, Titanium Grade 2 CP 3 Sheet, Pipe & Fittings Products: Titanium Grade 2 CP 3 Seamless Pipe, Titanium Grade 2 CP 3 Welded Pipe and Titanium Grade 2 CP 3 Seamless Tube from its locations.
Titanium Grade 2 CP 3 is supplied to specifications including ASTM B348 Gr 2, ASTM B381, ASTM F67 Gr 2, ASME SB-348, EN 10204 3.1, ASTM B265 Gr2, ASTM F67, ASME SB-265, NACE MR0175, EN 1, ASTM B265 Gr 2 and ASME SB265.
Typical uses of Titanium Grade 2 CP 3 include airframe components, aerospace, automotive, chemical processing equipment, cryogenic vessels, desalination, heat exchangers, power generation, surface condenser and tubing.
For Titanium Grade 2 CP 3, request a quote online or contact your nearest Titanium Industries location. Alloy data on this page is for reference only, not for design.
Titanium Grade 2 CP 3 | UNS #R50400 is generally known as the workhorse of the Commercially Pure Titanium grades and is therefor unalloyed. Because of its varied usability and wider availability, the metal has become used in many markets and applications. Grade 2 shares many similar qualities to Grade 1 Titanium, including corrosion resistance. Grade 2 is stronger, however.
Due to higher levels of iron and oxygen, Grade 2 Titanium possess high strength, good formability and weldability, and ductility. These traits makes Grade 2 Titanium Bar and Sheet a primary choice for a wide variety applications.
Commercially Pure or CP titanium in unalloyed. Grade 2 has higher levels of iron and oxygen than other CP grades, which offers excellent formability and moderate strength with superior corrosion resistance. CP Grade 2 titanium is widely used in heat exchangers. CP2 is one of the most common titanium grades, with properties that make it a good candidate for chemical and marine, aerospace and medical applications.
Mill Products:
Titanium Grade 2 CP 3 Round Bar Specifications:
- ASTM B348 Gr 2, ASTM B381 Gr. F2, ASTM F67 Gr 2, ASME SB-348 Gr 2, EN 10204 3.1
Titanium Grade 2 CP 3 Plate Specifications:
- ASTM B265 Gr2, ASTM F67, ASME SB-265, NACE MR0175, EN 1-204:2005 3.1
Titanium Grade 2 CP 3 Sheet Specifications:
- ASTM B265 Gr 2, ASTM F67, ASME SB265, EN 10204.3.1
Titanium Grade 2 CP 3 Wire Specifications
- AWS A5.16-13 ERTI-2, AMS 4951
Pipe & Fittings Products:
Titanium Grade 2 CP 3 Seamless Pipe Specifications:
- ASTM B861 Gr 2, NACE MR0175, ASME SB-861, NORSOK M-650
Titanium Grade 2 CP 3 Welded Pipe Specifications:
- ASTM B862 Gr 2, ASME SB-862, NACE MR0175
Titanium Grade 2 CP 3 Seamless Tube Specifications:
- ASTM B338 Gr 2, ASME SB-338 Gr 2, EN 01204.3.1
Titanium Grade 2 CP 3 Welded Tube Specifications:
Titanium Grade 2 CP 3 Applications:
- Airframe Components
- Aerospace
- Automotive
- Chemical Processing Equipment
- Cryogenic Vessels
- Desalination
- Heat Exchangers
- Power Generation
- Surface Condenser
- Tubing
Titanium Grade 2 Mill Products:
Titanium Grade 2 Pipe & Tube:
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| C ≤ 0.08% | H ≤ 0.015% | Fe ≤ 0.2% | N ≤ 0.03% | O 0.18% | |||||
| Ti balance | |||||||||
| PHYSICAL PROPERTIES | ||||||
|---|---|---|---|---|---|---|
| Density | Electrical conductivity (% IACS) | Thermal conductivity (BTU-in/hr-ft²-°F) | Specific heat (BTU/lb-°F) | Thermal expansion (1/°F) | Thermal expansion | Melting Point (°F) |
| 0.163 | 4.11 | 111 | 0.124 | 4.78E-06 | - | 3040 |
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Property | Minimum | Maximum | |||||||
| Yield Strength Range (Rp0.2 Offset) (ksi) | 25 | - | |||||||
| Tensile Strength Range (Rm) (ksi) | 35 | - | |||||||
| Elongation (AL=5 x Ø) | 24.0% | 29.0% | |||||||
| Brinell Hardness (H) | - | 120 | |||||||
| Modulus of Elasticity (ksi) (E): 15200 | |||||||||
| Machineability General Index: 40% | |||||||||
Titanium Grade 2 CP 3: questions and answers
What is Titanium Grade 2 CP 3?
What is Titanium Grade 2 CP 3?
Titanium Grade 2 CP 3 | UNS #R50400 is generally known as the workhorse of the Commercially Pure Titanium grades and is therefor unalloyed.
Which Titanium Grade 2 CP 3 product forms does Titanium Industries stock?
Which Titanium Grade 2 CP 3 product forms does Titanium Industries stock?
Titanium Grade 2 CP 3 | UNS #R50400 is generally known as the workhorse of the Commercially Pure Titanium grades and is therefor unalloyed. Because of its varied usability and wider availability, the metal has become used in many markets and applications. Grade 2 shares many similar qualities to Grade 1 Titanium, including corrosion resistance. Grade 2 is stronger, however. Due to higher levels of iron and oxygen, Grade 2 Titanium possess high strength, good formability and weldability, and ductility. These traits makes Grade 2 Titanium Bar and Sheet a primary choice for a wide variety applications. Commercially Pure or CP titanium in unalloyed. Grade 2 has higher levels of iron and oxygen than other CP grades, which offers excellent formability and moderate strength with superior corrosion resistance. CP Grade 2 titanium is widely used in heat exchangers. CP2 is one of the most common titanium grades, with properties that make it a good candidate for chemical and marine, aerospace and medical applications. Mill Products: Titanium Grade 2 CP 3 Round Bar, Titanium Grade 2 CP 3 Plate, Titanium Grade 2 CP 3 Sheet, Pipe & Fittings Products: Titanium Grade 2 CP 3 Seamless Pipe, Titanium Grade 2 CP 3 Welded Pipe and Titanium Grade 2 CP 3 Seamless Tube.
Which specifications does Titanium Grade 2 CP 3 meet?
Which specifications does Titanium Grade 2 CP 3 meet?
ASTM B348 Gr 2, ASTM B381, ASTM F67 Gr 2, ASME SB-348, EN 10204 3.1, ASTM B265 Gr2, ASTM F67, ASME SB-265, NACE MR0175, EN 1, ASTM B265 Gr 2 and ASME SB265.
What is Titanium Grade 2 CP 3 used for?
What is Titanium Grade 2 CP 3 used for?
Airframe components, aerospace, automotive, chemical processing equipment, cryogenic vessels, desalination, heat exchangers, power generation, surface condenser and tubing.