ASME SB-265

What ASME SB-265 covers

ASME SB-265 is the standard specification for titanium and titanium alloy sheet and plate.

Titanium Industries stocks Titanium Grade 2 Plate, Titanium Grade 2 Sheet, Titanium Grade 3 Sheet and Titanium Grade 4 Sheet to ASME SB-265.

For ASME SB-265 material, request a quote online or contact your nearest Titanium Industries location. The information on this page is for reference only and does not replace the specification itself.

Weight Calculator

ASME SB-265 | Standard Specification for Titanium and Titanium Alloy Sheet and Plate

Identical with ASTM B265, ASME SB-265 is the standard specification for all grades Titanium and Titanium alloy strip, sheet and plate. The strip, sheet, and plate are typically manufactured by hot-rolling or cold-rolling processes furnished in annealed, descaled, sandblasted or ground conditions. Any product 0.187"/4.75 mm and under in thickness and less than 24"/610 mm in width is classified as Titanium strip. Products 0.187"/4.75 mm and under in thickness and 24"/610 mm or more in width are classified as Titanium sheet. Any product over 0.187"4.75 mm in thickness and over 10"/254 mm in width is classified as Titanium plate.

Except for the terminology and grades of Titanium and Titanium alloy, the standard specification also covers referenced inspection and test documents, ordering information, chemical compositions, mechanical properties, permissible variations in dimensions, finish, sampling and methods for chemical analysis, retests, rounding-off procedure, rejection rules, certification, marking and packaging requirements, surface requirement bend tests, special flatness requirements.

Relevant Products:

Follow us on Social Media: