ASME SB-348

What ASME SB-348 covers

ASME SB-348 is the standard specification for titanium and titanium alloy bars and billets.

Titanium Industries stocks Titanium Grade 1 Round Bar, Titanium Grade 2 Round Bar and Titanium Grade 4 Round Bar to ASME SB-348.

For ASME SB-348 material, request a quote online or contact your nearest Titanium Industries location. The information on this page is for reference only and does not replace the specification itself.

Weight Calculator

ASME SB-348 | Quality Standard Specification for Titanium and Titanium Alloy Bars and Billets

Identical with ASTM B348, ASME SB-348 is the standard specification for titanium and titanium alloy bars and billets. This specification covers all annealed grades of titanium and titanium alloy. Titanium bars can be hot rolled, forged, extruded, or cold worked with a cross sectional area of ≤ 16 inch^2. Rectangular bars must be ≤ 10 inch in width and > 4.8 mm in thickness. Titanium billets can be hot worked or forged from an ingot, with a cross sectional area > 16 inch² whose width is less than 5 times its thickness.

The standard specification also covers referenced documents, chemical composition, mechanical properties, dimensions, weight, permissible variations, workmanship, finish, appearance, test & inspection, and packing information for titanium and titanium alloy bars and billets.

Request a quote

Relevant Products:

Follow us on Social Media: