Titanium Eccentric Reducer
Titanium Industries carries a wide range of Titanium Eccentric Reducers, please find our available sizes below.
Dimensional tolerances conform to ASME B16.9. Fitting wall thicknesses conform to standard schedule 10S and 40S ASME B36.19M wall pipe.
Butt welding fittings are permanently marked by electro-chemical etching in accordance with ASME B16.9. Estimated fitting weights are based on a density of 0.163 lbs/cubic inch.
Not seeing the product form, grade, alloy, or specification you require listed below? Please contact us!
| Primary Description | Pieces | PRICE/pc | Buy |
|---|---|---|---|
| 2.000" X 1.000" S10 | $0.00 | ||
| 2.000" X 1.500" S10 | $0.00 | ||
| 3.000" X 2.000" S10 | $0.00 | ||
| 4.000" x 3.000" S10 | $0.00 | ||
| 6.000" x 3.000" S10 | $0.00 | ||
| 6.000" x 4.000" S10 | $0.00 | ||
| 6.000" x 4.000" S40 | $0.00 | ||
| 8.000" X 6.000" S10 | $0.00 |
| OUTSIDE DIAMETER | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| LARGE END | SMALL END | ||||||||||
| Primary Description | Large End (OD) | Small End (OD) | Inside Diameter (ID) | Wall Thickness (T) | Diameter (ID) | Wall Thickness (T) | Approx. Weight in Lbs. | Pieces | PRICE/pc | Buy | |
| 2.000" X 1.000" S10 | 2.375 | 1.315 | 2.157 | 1.097 | 0.109 | 0.35 | $0.00 | ||||
| 2.000" X 1.500" S10 | 2.375 | 1.9 | 2.157 | 1.682 | 0.109 | 0.39 | $0.00 | ||||
| 3.000" X 2.000" S10 | 3.5 | 2.375 | 3.26 | 2.157 | 0.109 | 0.69 | $0.00 | ||||
| 4.000" x 3.000" S10 | 4.5 | 3.5 | 4.26 | 3.26 | 0.12 | 1.1 | $0.00 | ||||
| 6.000" x 3.000" S10 | 6.625 | 3.5 | 6.357 | 3.26 | 0.12 | 2.29 | $0.00 | ||||
| 6.000" x 4.000" S10 | 6.625 | 4.5 | 6.357 | 4.26 | 0.12 | 2.47 | $0.00 | ||||
| 6.000" x 4.000" S40 | 6.625 | 4.5 | 6.065 | 4.026 | 0.237 | 5.14 | $0.00 | ||||
| 8.000" X 6.000" S10 | 8.625 | 6.625 | 8.329 | 4.26 | 0.12 | 2.47 | $0.00 | ||||
- All dimensions are in inches
- Dimensional tolerances conform to ASME B16.9
- Fitting wall thicknesses conform with standard schedule 10S and 40S ASME B36.19M wall pipe.
- Butt welding fittings are permanently marked by electro-chemical etching in accordance with ASME B16.9
- Estimated fitting weights are based on a density of .163 lbs/cubic inch