AMS 4124
Aluminum Alloy: 7075-T7351
Product Forms: Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire
Condition: Solution Heat Treated, Stress Relieved by Stretching, and Overaged
Scope: This specification covers an aluminum alloy in the form of rolled or cold finished bars, rods, and wire up to 6.000 inches (152.40 mm) in nominal diameter or least nominal dimension.
Product availability: Aluminum Alloy 7075-T7351 round bar
DISCLAIMER: The use of this information should be considered strictly voluntary. Information contained in this page or across the domain, may contain typographical errors and are for reference only. Information presented are purely generalizations and are not a substitution for AMS specifications.
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Al 89.25% | Cu 1.6% | Si | Mn | Fe | |||||
| Mg 2.5% | Ti | Cr 0.23% | Zn 5.6% | Other | |||||
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Tensile Strength: 63 – 83 ksi | Yield Strength: 15.2 – 68 ksi | Elongation: 11.0 – 13.0% | |||||||
Tensile properties and associated requirements vary due to orientation, section thickness, and engineering requirements.
T.I. Approvals:
Plus a wide range of approvals from most leading OEM’s across Aerospace, Medical, Industrial, and Oil and Gas markets.