What AMS 4123 covers
AMS 4123 is the aerospace material specification for aluminum alloy, rolled or cold finished, bars, rods, & wire.
AMS 4123 applies to aluminum alloy 7075-T7351, as aluminum alloy, rolled or cold finished bars and rods, in the solution and precipitation heat treated condition.
Aluminum Alloy 7075 is used for aircraft structural parts, extrusions, fittings, irrigation tubing and tools.
Specifications that cross-reference AMS 4123 include AMS 4124, AMS QQ-A-225/9 and ASTM B211.
For AMS 4123 material, request a quote online or contact your nearest Titanium Industries location. The information on this page is for reference only and does not replace the specification itself.
AMS 4123
Aluminum Alloy: 7075-T7351
Product Forms: Aluminum Alloy, Rolled or Cold Finished Bars and Rods
Condition: Solution and Precipitation Heat Treated
Scope: This specification covers an aluminum alloy in the form of bars and rods.
Product availability: Aluminum Alloy 7075-T7351 round bar
DISCLAIMER: The use of this information should be considered strictly voluntary. Information contained in this page or across the domain, may contain typographical errors and are for reference only. Information presented are purely generalizations and are not a substitution for AMS specifications.
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Al 89.25% | Cu 1.6% | Si <0.40% | Mn <0.30% | Fe <0.50% | |||||
| Mg 2.5% | Ti <0.20% Max | Cr 0.23% | Zn 5.6% | Other <0.15% | |||||
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Tensile Strength: 63 - 83 ksi | Yield Strength: 15.2 - 68 ksi | Elongation: 11.0 - 13.0% | |||||||
Tensile properties and associated requirements vary due to orientation, section thickness, and engineering requirements.
AMS 4123: questions and answers
What does AMS 4123 cover?
What does AMS 4123 cover?
AMS 4123 covers an aluminum alloy in the form of bars and rods.
Which specifications cross-reference AMS 4123?
Which specifications cross-reference AMS 4123?
AMS 4124, AMS QQ-A-225/9 and ASTM B211.
What is Aluminum Alloy 7075 used for?
What is Aluminum Alloy 7075 used for?
Aircraft structural parts, extrusions, fittings, irrigation tubing and tools.