Titanium Grade 3 CP 2 | UNS #R50550 offers slightly higher mechanical properties than Grade 2 Titanium. Grade 3 demonstrates similar ductility and formability, however. This metal is typically used for applications where corrosion resistance is a major requirement and largely used in chemical production, some airframe applications, and marine use.
Titanium Grade 3 CP 2 Round Bar Inventory Size Range:
- Min Diameter: 0.125″/3.175 mm | Max Diameter: 14.000″/400.00 mm
Titanium Grade 3 CP 2 Specifications:
- ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-338, ASME SB-348
- ASTM-B-265; ASTM-B-337; ASTM-B-348
- AMS-4900; AMS-4902
- EN 3.7055
Titanium Grade 3 Mill Product Forms:
Titanium Grade 3 CP 2 Applications:
- Airframe Components
- Aerospace
- Chemical Processing Equipment
- Marine
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| C ≤ 0.10% | H ≤ 0.015% | Fe ≤ 0.30% | N ≤ 0.050% | O 0.35% | |||||
| Ti 98.885% | Other ≤ 0.30% | ||||||||
| PHYSICAL PROPERTIES | ||||||
|---|---|---|---|---|---|---|
| Density | Electrical conductivity (% IACS) | Thermal conductivity (BTU-in/hr-ft²-°F) | Specific heat (BTU/lb-°F) | Thermal expansion (1/°F) | Melting Point (°F) | |
| 0.163 | 3.19 | 138 | 0.125 | 0.00000478 | 3020 | |
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Property | Minimum | Maximum | |||||||
| Yield Strength Range (Rp0.2 Offset) (ksi) | 55 | – | |||||||
| Tensile Strength Range (Rm) (ksi) | 65 | – | |||||||
| Elongation (AL=5 x Ø) | 18.0% | 35.0% | |||||||
| Brinell Hardness (H) | 225 | 2666 | |||||||
| Modulus of Elasticity (ksi) (E): 15200 | |||||||||
| Machineability General Index: Unknown | |||||||||
T.I. is accredited/approved by:
Plus a wide range of approvals from most leading OEM’s across Aerospace, Medical, Industrial, and Oil and Gas markets.
English
French
German
Italian
Portuguese
Russian
Spanish