What AMS 5844 covers
AMS 5844 is the aerospace material specification for steel bars, forgings, tubing, and rings, corrosion and heat resistant.
AMS 5844 applies to Nickel Alloy MP35N®, as alloy bars, high strength, corrosion resistant, in the solution heat treated, cold drawn, centerless ground condition.
Titanium Industries stocks Incoloy Alloy A286 Round Bar to AMS 5844.
Nickel Alloy MP35N® is used for medical devices and instrumentation, marine engineering, oil & gas, chemical processing and food processing.
For AMS 5844 material, request a quote online or contact your nearest Titanium Industries location. The information on this page is for reference only and does not replace the specification itself.
AMS 5844
Nickel Alloy: Nickel Alloy MP35N®
Product Forms: Alloy Bars, High Strength, Corrosion Resistant
Condition: Solution Heat Treated, Cold Drawn, Centerless Ground
Scope: This specification covers a high-strength, corrosion-resistant alloy in the form of bars up to 1.75 inch (44.4 mm) in diameter.
Product availability:
DISCLAIMER: The use of this information should be considered strictly voluntary. Information contained in this page or across the domain, may contain typographical errors and are for reference only. Information presented are purely generalizations and are not a substitution for AMS specifications.
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ni 52.5% | Cr 19% | Nb 5.125% | Mo 3.05% | Co <=1% | |||||
| Ti 0.90% | Si <=0.35% | Mn <=0.35% | Cu <= 0.30% | Al 0.50% | |||||
| C <=0.08% | Ta <=0.05% | B <=0.006% | P <= 0.015% | S <=0.015% | |||||
| Fe balance | |||||||||
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Tensile Strength: 152 - 362 ksi | Yield Strength: 29 - 57 ksi | Elongation: 1.0 - 40.0% | |||||||
Tensile properties and associated requirements vary due to orientation, section thickness, and engineering requirements.
Nickel Alloy MP35N® Applications:
- Medical Devices and Instrumentation
- Marine Engineering
- Oil & Gas
- Chemical Processing
- Food Processing
AMS 5844: questions and answers
What does AMS 5844 cover?
What does AMS 5844 cover?
AMS 5844 covers a high-strength, corrosion-resistant alloy in the form of bars up to 1.75 inch (44.4 mm) in diameter.
Which products does Titanium Industries stock to AMS 5844?
Which products does Titanium Industries stock to AMS 5844?
Incoloy Alloy A286 Round Bar.
What is Nickel Alloy MP35N® used for?
What is Nickel Alloy MP35N® used for?
Medical devices and instrumentation, marine engineering, oil & gas, chemical processing and food processing.