AMS 5663
Nickel Alloy: 718
Product Forms: Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant Nickel Base
Condition: Solution and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted
Scope: Specifies a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings up to 10 inches (254 mm) in least cross-sectional dimension, having a maximum cross-sectional area of 78 in (503 cm), and stock of any size for forging or flash welded rings.
Product availability:
DISCLAIMER: The use of this information should be considered strictly voluntary. Information contained in this page or across the domain, may contain typographical errors and are for reference only. Information presented are purely generalizations and are not a substitution for AMS specifications.
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ni 52.5% | Cr 19.0% | Mo 3.05% | C | Nb 5.035% | |||||
| Mn | Si | P | S | Cu | |||||
| Co | |||||||||
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Tensile Strength: 14 – 220 ksi | Yield Strength: 80 – 150 ksi | Elongation: 18 – 27.0% | |||||||
Tensile properties and associated requirements vary due to orientation, section thickness, and engineering requirements.
All service center locations are AS9100 & ISO9001 accredited.
Birmingham, UK and Meerbusch, Germany service center locations are AS9100, AS9120 & ISO9001 accredited.
T.I. Approvals:
Plus a wide range of approvals from most leading OEM’s across Aerospace, Medical, Industrial, and Oil and Gas markets.