AMS 5659
Stainless Steel Grade: 15-5 PH
Product Forms: Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and Extrusions
Condition: Consumable Electrode Re-Melted Solution Heat Treated, Precipitation Hardenable
Product availability:
DISCLAIMER: The use of this information should be considered strictly voluntary. Information contained in this page or across the domain, may contain typographical errors and are for reference only. Information presented are purely generalizations and are not a substitution for AMS specifications.
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Fe 75% | Cr 14.48% | Ni 4.5% | Cu 3.5% | Mn | |||||
| Si | Nb+Ta 0.3% | C | P | S | |||||
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Tensile Strength: 115 – 210 ksi | Yield Strength: 140 – 200 ksi | Elongation: 7.6 – 12.0% | |||||||
Tensile properties and associated requirements vary due to orientation, section thickness, and engineering requirements.
Stainless Steel 15-5 PH Applications:
- Aircraft Structural Applications
- Power Generation
- Valves and Shafts
- Gears and Pumps
- Fasteners
- Oil & Gas
- Food Processing Equipment
Cross Reference Specifications
All service center locations are AS9100 & ISO9001 accredited.
Birmingham, UK and Meerbusch, Germany service center locations are AS9100, AS9120 & ISO9001 accredited.
T.I. Approvals:
Plus a wide range of approvals from most leading OEM’s across Aerospace, Medical, Industrial, and Oil and Gas markets.