Stainless Steel Grade: 440C
Product Forms: Steel, Corrosion-Resistant, Bars, Wire, and Forgings
Application: Typically specified for parts requiring hardness up to 58 HRC and resistance to wear, corrosion, and oxidation.
DISCLAIMER: The use of this information should be considered strictly voluntary. Information contained in this page or across the domain, may contain typographical errors and are for reference only. Information presented are purely generalizations and are not a substitution for AMS specifications.
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
|Fe 79.15%||Cr 17.0%||Mn 1.0%||C 1.10%||Si 1.0%|
|Tensile Strength: 110 – 276 ksi||Yield Strength: 60.9 – 276 ksi||Elongation: 2.0 – 15.0%|
Tensile properties and associated requirements vary due to orientation, section thickness, and engineering requirements.
Stainless Steel Grade 440C Applications:
- Ball Bearings
- Measuring Tools and Instruments
- Surgical Blades
- Knife Blades
- Cutting Tools
Cross Reference Specifications