AMS 4911
Titanium Alloy: Titanium 6Al-4V Grade 5
Product Forms: Titanium Alloy Sheet, Strip, and Plate
Condition: Annealed
Product availability:
DISCLAIMER: The use of this information should be considered strictly voluntary. Information contained in this page or across the domain, may contain typographical errors and are for reference only. Information presented are purely generalizations and are not a substitution for AMS specifications.
| CHEMICAL COMPOSITION | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Al 6.25% | V 4.00% | C ≤ 0.8% | N ≤ 0.05% | O ≤ 0.20% | |||||
| H ≤ 0.0125% | Fe ≤ 0.30% | Y ≤ 0.005% | Other ≤ 0.40% | Ti Remainder | |||||
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Tensile Strength: 130 – 134 ksi | Yield Strength: 120 – 126 ksi | Elongation: 6 – 10% | |||||||
Tensile properties and associated requirements vary due to orientation, section thickness, and engineering requirements.
Required Acceptance Tests
- Bend Test
- Chemical Composition
- Microstructure
- Surface Contamination
- Tensile Properties
- Ultrasonic (where required)
Cross Reference Specifications
- AMS 2631, AMS 6932, AMS-T-9046
- ASTM F1472, ASTM B265 Gr 5
- EN 10204.3.1
All service center locations are AS9100 & ISO9001 accredited.
Birmingham, UK and Meerbusch, Germany service center locations are AS9100, AS9120 & ISO9001 accredited.
T.I. Approvals:
Plus a wide range of approvals from most leading OEM’s across Aerospace, Medical, Industrial, and Oil and Gas markets.