Titanium 6Al-4V ELI Grade 23 is produced at a higher purity than Titanium 6Al-4V Grade 5.
Titanium 6Al-4V ELI Grade 23: forms, specifications and uses
Titanium 6Al-4V ELI Grade 23 is supplied to specifications including AMS 4907, AMS 4930, AMS 4931, AMS 4956, ASTM F467 and ASTM F468.
Typical uses of Titanium 6Al-4V ELI Grade 23 include aircraft applications, bone fixation and similar devices, cryogenic and high pressure vessels, ligature clips, marine and salt water applications, orthopedic cables, pins, and screws, orthodontic appliances and surgical implants, joint replacements and staples.
For Titanium 6Al-4V ELI Grade 23, request a quote online or contact your nearest Titanium Industries location. Alloy data on this page is for reference only, not for design.
Titanium 6Al-4V ELI Grade 23 is produced at a higher purity than Titanium 6Al-4V Grade 5. Though this alloy is mainly recognized as the best dental and medical Titanium grade, it is also widely used in applications when there is a need for toughness, high strength, light weight, and good corrosion resistance.
Because of these unique biocompatibility characteristics, Titanium 6Al-4v ELI Grade 23 is also used in bio-medical applications, implants, and similar surgical procedures and situations.
Titanium 6Al-4V ELI Grade 23 Specifications:
- AMS: AMS 4907, AMS 4930, AMS 4931, AMS 4956
- ASTM: ASTM F467, ASTM F468
- MIL: MIL F-83142, MIL T-9046, MIL T-9047
Titanium 6Al-4V ELI Grade 23 products offered at all Titanium Industries' locations:
Titanium 6Al-4V ELI Grade 23 Applications:
- Aircraft Applications
- Bone Fixation and Similar Devices
- Cryogenic and High Pressure Vessels
- Ligature Clips
- Marine and Salt Water Applications
- Orthopedic Cables, Pins, and Screws
- Orthodontic Appliances
- Surgical Implants, Joint Replacements and Staples
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ti 88.09 - 91% | Al 5.5 - 6.5%% | V 3.5 - 4.5% | Fe <=0.25% | C <=0.080% | |||||||
| N <=0.030% | H <=0.0125% | Other, each <=0.10% | Other, total <=0.40% | ||||||||
| PHYSICAL PROPERTIES | ||||||
|---|---|---|---|---|---|---|
| Density | Electrical conductivity (% IACS) | Thermal conductivity (BTU-in/hr-ft²-°F) | Specific heat capacity | Thermal expansion (1/°F) | Melting Point (°F) | |
| 0.160 | 0.97 | 46.5 | 560 | 0.00000478 | 3200 | |
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Property | Minimum | Maximum | |||||||
| Yield Strength Range (Rp0.2 Offset) (ksi) | 120 | 160 | |||||||
| Tensile Strength Range (Rm) (ksi) | 125 | 174 | |||||||
| Elongation (AL=5 x Ø) | 10.0% | 18.0% | |||||||
| Brinell Hardness (H) | 326 | 379 | |||||||
| Modulus of Elasticity (ksi) (E): 16500 | |||||||||
| Machineability General Index: 21% | |||||||||
Titanium 6Al-4V ELI Grade 23: questions and answers
What is Titanium 6Al-4V ELI Grade 23?
What is Titanium 6Al-4V ELI Grade 23?
Titanium 6Al-4V ELI Grade 23 is produced at a higher purity than Titanium 6Al-4V Grade 5.
Which specifications does Titanium 6Al-4V ELI Grade 23 meet?
Which specifications does Titanium 6Al-4V ELI Grade 23 meet?
AMS 4907, AMS 4930, AMS 4931, AMS 4956, ASTM F467 and ASTM F468.
What is Titanium 6Al-4V ELI Grade 23 used for?
What is Titanium 6Al-4V ELI Grade 23 used for?
Aircraft applications, bone fixation and similar devices, cryogenic and high pressure vessels, ligature clips, marine and salt water applications, orthopedic cables, pins, and screws, orthodontic appliances and surgical implants, joint replacements and staples.