Titanium 6Al-2SN-4ZR-2MO: Titanium 6-2-4-2 (6Al-2Sn-4Zr-2Mo) is an alpha-beta titanium alloy that is capable of being heat treated to higher strengths in larger section sizes than 6Al-4V Grade 5.
Titanium 6Al-2SN-4ZR-2MO: forms, specifications and uses
Typical uses of Titanium 6Al-2SN-4ZR-2MO include high-temperature jet engines, high performance automotive valves and sheet metal parts in afterburners and hot airframe sections.
For Titanium 6Al-2SN-4ZR-2MO, request a quote online or contact your nearest Titanium Industries location. Alloy data on this page is for reference only, not for design.
Titanium 6-2-4-2 (6Al-2Sn-4Zr-2Mo) is an alpha-beta titanium alloy that is capable of being heat treated to higher strengths in larger section sizes than 6Al-4V Grade 5. Typically found in forged components, 6Al-2Sn-4Zr-2Mo forged material demonstrates greater strength, ductility and a good combination of low-cycle fatigue and fatigue-crack growth resistance. 6Al-2Sn-4Zr-2Mo is normally used in the intermediate compressor stages of turbine engines for disks, blades, seals and other airframe parts.
Titanium Industries' offers a wide range of products and services.
Titanium Round Bar | Titanium Plate | Titanium Sheet
Titanium 6Al-2Sn-4Zr-2Mo Applications:
- High-temperature jet engines
- Gas turbine compressor components
- Blades, Discs, Spacers and Seals
- High performance automotive valves
- Sheet metal parts in afterburners and hot airframe sections
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ti 83.785 - 87.24% | Al 5.5 - 6.5% | Zr 3.6 - 4.4% | Sn 1.8 - 2.2% | Mo 1.8 - 2.2% | |||||||
| Fe ≤ 0.25% | O ≤ 0.15% | Si 0.060 - 0.10% | C ≤ 0.050% | N ≤ 0.050% | |||||||
| H ≤ 0.015% | Other, each ≤ 0.10% | Other, total≤ 0.30% | |||||||||
| PHYSICAL PROPERTIES | ||||||
|---|---|---|---|---|---|---|
| Density | Electrical conductivity (% IACS) | Thermal conductivity (BTU-in/hr-ft²-°F) | Thermal expansion (1/°F) | Melting Point (°F) | ||
| 0.164 | - | 48.6 | 0.00000428 | 3101 | ||
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Property | Minimum | Maximum | |||||||
| Yield Strength Range (Rp0.2 Offset) (ksi) | - | 152 | |||||||
| Tensile Strength Range (Rm) (ksi) | - | 161 | |||||||
| Elongation (AL=5 x Ø) | - | 13.0% | |||||||
| Brinell Hardness (H) | - | 318 | |||||||
| Modulus of Elasticity (ksi) (E): 17100 | |||||||||
| Machineability General Index: - | |||||||||
Titanium 6Al-2SN-4ZR-2MO: questions and answers
What is Titanium 6Al-2SN-4ZR-2MO?
What is Titanium 6Al-2SN-4ZR-2MO?
Titanium 6-2-4-2 (6Al-2Sn-4Zr-2Mo) is an alpha-beta titanium alloy that is capable of being heat treated to higher strengths in larger section sizes than 6Al-4V Grade 5.
What is Titanium 6Al-2SN-4ZR-2MO used for?
What is Titanium 6Al-2SN-4ZR-2MO used for?
High-temperature jet engines, high performance automotive valves and sheet metal parts in afterburners and hot airframe sections.
How do I order Titanium 6Al-2SN-4ZR-2MO?
How do I order Titanium 6Al-2SN-4ZR-2MO?
Request a quote online or contact your nearest Titanium Industries location.