Stainless Steel Grade 316L | UNS# S31603 is a standard molybdenum bearing grade in the austenitic family of Stainless Steels. The inclusion of molybdenum gives 316L better corrosion resistance against pitting and chloride environments than Stainless Steel grade 304. 316L is also the low carbon variant of 316 and demonstrates a high immunity sensitization. Because of these desirable qualities, 316L is widely used in the chemical production, oil & gas, and similar markets. 316L is also shows excellent fabricability, strength, toughness, and performs well even in cryogenic temperatures.
Stainless Steel Alloy 316L Specifications:
Stainless Steel Alloy 316L products offered at all Titanium Industries’ locations:
Stainless Steel Alloy 316L Applications:
- Chemical and Petrochemical Processing,
- Medical Implants and Instrumentation
- Heat Exchangers and Surface Condensers
- Semiconductors
- Petroleum Refining
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| C | Cr 17.25% | Ni 12.0% | Mo 2.5% | Mn | |||||
| Si 1.0% | P | S 0 | |||||||
| PHYSICAL PROPERTIES | ||||||
|---|---|---|---|---|---|---|
| Density | Electrical conductivity (% IACS) | Thermal conductivity (BTU-in/hr-ft²-°F) | Specific heat capacity | Thermal expansion (1/°F) | Melting Point (°F) | |
| 0.289 | 2.33 | 112 | 0.12 | 0.00000890 | 2510 | |
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Property | Minimum | Maximum | |||||||
| Yield Strength Range (Rp0.2 Offset) (ksi) | 25 | 170 | |||||||
| Tensile Strength Range (Rm) (ksi) | 70.3 | 90 | |||||||
| Elongation (AL=5 x Ø) | 35.0% | 60.0% | |||||||
| Brinell Hardness (H) | 146 | 217 | |||||||
| Modulus of Elasticity (ksi) (E): 28000 | |||||||||
| Machineability General Index: 36% | |||||||||
All service center locations are AS9100 & ISO9001 accredited.
Birmingham, UK and Meerbusch, Germany service center locations are AS9100, AS9120 & ISO9001 accredited.
T.I. Approvals:
Plus a wide range of approvals from most leading OEM’s across Aerospace, Medical, Industrial, and Oil and Gas markets.