Stainless Steel Alloy 303 | UNS# S30300 is an austenitic stainless steel designed for applications that require extensive machining necessities and demonstrates mild resistance in corrosive environments. Being the most readily available machinable chromium-nickel stainless steel grades, is non-magnetic in the annealed condition, and can only be hardened through cold working. Typically used in screw machine applications, fasteners, and fittings for aircraft.
Stainless Steel Alloy 303 Specifications:
Stainless Steel Alloy 303 products offered at all Titanium Industries’ locations:
Stainless Steel Alloy 303 Applications:
- Aircraft Applications
- Fasteners
- Screws
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| C | Cr 18% | Fe 69% | Mn | Mo 0.60% | |||||
| Ni 9.0% | P | Si | S >= 0.15% | ||||||
| PHYSICAL PROPERTIES | ||||||
|---|---|---|---|---|---|---|
| Density | Electrical conductivity (% IACS) | Thermal conductivity (BTU-in/hr-ft²-°F) | Specific heat capacity | Thermal expansion (1/°F) | Melting Point (°F) | |
| 0.289 | 2.4 | 112 | 0.12 | 0.00000930 | 2550 | |
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Property | Minimum | Maximum | |||||||
| Yield Strength Range (Rp0.2 Offset) (ksi) | 34.8 | 60.2 | |||||||
| Tensile Strength Range (Rm) (ksi) | 72.5 | 108.8 | |||||||
| Elongation (AL=5 x Ø) | 35.0% | 40.0% | |||||||
| Brinell Hardness (H) | 187 | 262 | |||||||
| Modulus of Elasticity (ksi) (E): 28000 | |||||||||
| Machineability General Index: 75% | |||||||||
All service center locations are AS9100 & ISO9001 accredited.
Birmingham, UK and Meerbusch, Germany service center locations are AS9100, AS9120 & ISO9001 accredited.
T.I. Approvals:
Plus a wide range of approvals from most leading OEM’s across Aerospace, Medical, Industrial, and Oil and Gas markets.