Nickel Alloy Inconel® 600 is a nickel-chromium alloy that exhibits good oxidation resistance at high temperatures and resistances against chloride environments.
Nickel Alloy Inconel® 600: forms, specifications and uses
Nickel Alloy Inconel® 600 is supplied to specifications including AMS 5665.
Typical uses of Nickel Alloy Inconel® 600 include aircraft applications, chemical processing, food processing and furnace components.
For Nickel Alloy Inconel® 600, request a quote online or contact your nearest Titanium Industries location. Alloy data on this page is for reference only, not for design.
Nickel Alloy Inconel® 600 is a nickel-chromium alloy that exhibits good oxidation resistance at high temperatures and resistances against chloride environments. Due to the chromium content, this alloy was originally designed for cryogenic temperatures and contains excellent mechanical properties for high strength and good workability. This alloy is widely used in the chemical and food processing, power generation, furnace components, and many other market segments.
Nickel Alloy Inconel® 600 Specifications:
- AMS: AMS 5665
- AS: AS 6279
- ISO: ISO 17025
Nickel Round Bar offered at all Titanium Industries' locations can be found here.
Nickel Alloy Inconel® 600 Applications:
- Aircraft Applications
- Chemical Processing
- Food Processing
- Furnace Components
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Cr 15.5% | Fe 8% | Mn <=1% | Cu <=0.5% | Si <=0.5% | |||||
| C <=0.15% | S <=0.015% | Ni remainder | |||||||
| PHYSICAL PROPERTIES | ||||||
|---|---|---|---|---|---|---|
| Density | Electrical conductivity (% IACS) | Thermal conductivity (BTU-in/hr-ft²-°F) | Specific heat capacity | Thermal expansion (1/°F) | Melting Point (°F) | |
| 0.305 | 1.67 | 103 | 0.106 | 0.00000739 | 2470 | |
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Property | Minimum | Maximum | |||||||
| Yield Strength Range (Rp0.2 Offset) (ksi) | 26.1 | 45 | |||||||
| Tensile Strength Range (Rm) (ksi) | 79.8 | 135 | |||||||
| Elongation (AL=5 x Ø) | 40.0% | 45.0% | |||||||
| Brinell Hardness (H) | 120 | 290 | |||||||
| Modulus of Elasticity (ksi) (E): 3000 | |||||||||
| Machineability General Index: 22% | |||||||||
Nickel Alloy Inconel® 600: questions and answers
What is Nickel Alloy Inconel® 600?
What is Nickel Alloy Inconel® 600?
Nickel Alloy Inconel® 600 is a nickel-chromium alloy that exhibits good oxidation resistance at high temperatures and resistances against chloride environments.
Which specifications does Nickel Alloy Inconel® 600 meet?
Which specifications does Nickel Alloy Inconel® 600 meet?
AMS 5665.
What is Nickel Alloy Inconel® 600 used for?
What is Nickel Alloy Inconel® 600 used for?
Aircraft applications, chemical processing, food processing and furnace components.