Nickel Alloy Waspaloy ® (UNS N07001) is an age-hardenable, nickel based super-alloy that exhibits good corrosion resistance, excellent strength properties, is mostly impervious to oxidation, and performs well in extreme environments.
Nickel Alloy Waspaloy: forms, specifications and uses
Nickel Alloy Waspaloy is supplied to specifications including AMS 5708 and AMS 5909.
Typical uses of Nickel Alloy Waspaloy include aerospace, fasteners, seals, rings, and shafts and gas turbines.
For Nickel Alloy Waspaloy, request a quote online or contact your nearest Titanium Industries location. Alloy data on this page is for reference only, not for design.
Nickel Alloy Waspaloy ® | UNS# N07001 is an age-hardenable, nickel based super-alloy that exhibits good corrosion resistance, excellent strength properties, is mostly impervious to oxidation, and performs well in extreme environments. Typically used in gas turbine engines that require strength and corrosion resistance at high temperatures, Waspaloy can also be found in compressors, shafts, seals, rings, fasteners, airframe assemblies, and missile systems. It has also performed better than Nickel Alloy 718 in most high temperature situations.
Nickel Alloy Waspaloy® Specifications:
- AMS 5708, AMS 5909 Capable
Nickel Alloy Waspaloy® offered at all Titanium Industries' locations:
Nickel Alloy Waspaloy® Round Bar
Waspaloy® Applications:
- Aerospace
- Fasteners
- Seals, Rings, and Shafts
- Gas Turbines
Discounted Products
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| C 0.02 - 0.10% | Mn 0.50% Max | Si 0.75% Max | Cr 18.0 - 21.0% | B 0.003 - 0.008% | |||||
| Fe 2.0% Max | Co 12.0 - 15.0% | Ti 2.60 - 3.25% | Al 1.0 - 1.50% | Zr 0.02 - 0.12% | |||||
| S 0.02% Max | Ni Balance | ||||||||
| PHYSICAL PROPERTIES | ||||||
|---|---|---|---|---|---|---|
| Density | Electrical conductivity (% IACS) | Thermal conductivity (BTU-in/hr-ft²-°F) | Specific heat capacity | Thermal expansion (1/°F) | Melting Point (°F) | |
| 0..296 | 1.34 | 87.4 | 0.125 | 0.00000772 | 2475 | |
Nickel Alloy Waspaloy: questions and answers
What is Nickel Alloy Waspaloy?
What is Nickel Alloy Waspaloy?
Nickel Alloy Waspaloy ® (UNS N07001) is an age-hardenable, nickel based super-alloy that exhibits good corrosion resistance, excellent strength properties, is mostly impervious to oxidation, and performs well in extreme environments.
Which specifications does Nickel Alloy Waspaloy meet?
Which specifications does Nickel Alloy Waspaloy meet?
AMS 5708 and AMS 5909.
What is Nickel Alloy Waspaloy used for?
What is Nickel Alloy Waspaloy used for?
Aerospace, fasteners, seals, rings, and shafts and gas turbines.