Aluminum Alloy 6061 | UNS# A96061 is a precipitation-hardened aluminum alloy that demonstrates good mechanical properties, good weldability, and is often extruded. 6061 is one of the most common alloys of Aluminum for general purpose uses.
Aluminum Alloy 6061 Specifications:
Aluminum Alloy 6061 Products Offered at Titanium Industries:
Aluminum Alloy 6061 Applications:
- Aerospace – Wings and Fuselage
- Marine Applications
- Automotive Parts
- Bicycle Frames
- Fishing Reels
- Suppressors
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Al 97% | Cu 0.3% | Si 0.6% | Mn 0.2% | Fe 0.7 % Max | |||||
| Mg 1% | Zn 0.3% Max | Ti 0.2% Max | Cr 0.2% Max | Other 0.2% | |||||
| PHYSICAL PROPERTIES | ||||||
|---|---|---|---|---|---|---|
| Density | Electrical conductivity (% IACS) | Thermal conductivity (BTU-in/hr-ft²-°F) | Specific heat capacity | Thermal expansion (1/°F) | Melting Point (°F) | |
| 0.0975 | 47.11 | 1250 | 0.214 | 0.00001310 | 1140 | |
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Property | Minimum | Maximum | |||||||
| Yield Strength Range (Rp0.2 Offset) (ksi) | 8 | 39 | |||||||
| Tensile Strength Range (Rm) (ksi) | 16 | 45 | |||||||
| Elongation (AL=5 x Ø) | 12.0% | 25.0% | |||||||
| Brinell Hardness (H) | 30 | 123 | |||||||
| Modulus of Elasticity (ksi) (E): 10000 | |||||||||
| Machineability General Index: 30% | |||||||||
All service center locations are AS9100 & ISO9001 accredited.
Birmingham, UK and Meerbusch, Germany service center locations are AS9100, AS9120 & ISO9001 accredited.
T.I. Approvals:
Plus a wide range of approvals from most leading OEM’s across Aerospace, Medical, Industrial, and Oil and Gas markets.