Alloy Steel SAE AISI H-11: forms, specifications and uses
Alloy Steel SAE AISI H-11 (UNS T20811): Alloy Steel AISI/SAE H-11 is a chromium hot-worked tool steel, designated as group H according to the AISI classification system.
Titanium Industries offers Alloy Steel H-11 Round Bar from its locations.
Alloy Steel SAE AISI H-11 is supplied to specifications including AMS 6485, AMS 6487 and AMS 6488.
Typical uses of Alloy Steel SAE AISI H-11 include aircraft landing gear.
For Alloy Steel SAE AISI H-11, request a quote online or contact your nearest Titanium Industries location. Alloy data on this page is for reference only, not for design.
Alloy Steel AISI/SAE H-11 is a chromium hot-worked tool steel, designated as group H according to the AISI classification system. This series of steels start from H1 to H19, with the most commonly used chromium hot-work steels being H11, H12, and H13. This group of tool steels are subjected to minimal distortion during hardening due to their balanced alloy content. Tools normally manufactured from chromium hot-work steels can be cooled using water without damage due to the low carbon and alloy content.
SAE/AISI H-11 Specifications:
Alloy Steel H-11 product forms offered at all Titanium Industries’ locations:
Alloy Steel AISI SAE H-11 Applications:
- Aircraft landing gear
DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.
| Chemical Composition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| C 0.33 - 0.43% | Mn 0.20 - 0.50% | Si 0.80 - 1.20% | Cr 4.75 - 5.50% | Mo 1.10 - 1.60% | |||||
| V 0.30 - 0.60% | Cu 0.25% | P 0.03% | S 0.03% | Fe Balance | |||||
| PHYSICAL PROPERTIES | ||||||
|---|---|---|---|---|---|---|
| Density (lbs/cubic in) | Electrical conductivity (% IACS) | Thermal conductivity (W/m-K) | Specific heat capacity (BTU/lb-°F) | Thermal expansion (µm/m-K) | Melting Point (°F) | |
| 0.282 | 8.2% | 42.2 | 0.11 | 6.63 | 2600 | |
| Mechanical Properties | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Property | Minimum | Maximum | |||||||
| Yield Strength Range (Mpa) | - | - | |||||||
| Tensile Strength Range (Mpa) | 690 | 1840 | |||||||
| Elongation | 14% | 15% | |||||||
| Hardness, Brinell | - | - | |||||||
| Modulus of Elasticity (ksi) (E): 27500 | |||||||||
| Machineability General Index: 75 - 80% | |||||||||
Alloy Steel SAE AISI H-11: questions and answers
What is Alloy Steel SAE AISI H-11?
What is Alloy Steel SAE AISI H-11?
Alloy Steel AISI/SAE H-11 is a chromium hot-worked tool steel, designated as group H according to the AISI classification system.
Which Alloy Steel SAE AISI H-11 product forms does Titanium Industries stock?
Which Alloy Steel SAE AISI H-11 product forms does Titanium Industries stock?
Alloy Steel H-11 Round Bar.
Which specifications does Alloy Steel SAE AISI H-11 meet?
Which specifications does Alloy Steel SAE AISI H-11 meet?
AMS 6485, AMS 6487 and AMS 6488.
What is Alloy Steel SAE AISI H-11 used for?
What is Alloy Steel SAE AISI H-11 used for?
Aircraft landing gear.