Alloy Steel AISI E9310 | UNS# G93106

Alloy Steel AISI E9310 is a vacuum degassed, carburizing steel alloy that is suitable for heavy sectioned components.

Alloy Steel AISI E9310: forms, specifications and uses

Alloy Steel AISI E9310 is supplied to specifications including AMS 2301, AMS 6260, AMS 6265 and ASTM A322.

Typical uses of Alloy Steel AISI E9310 include aircraft structural components, rocket motor cases, armor plate, pressure vessels and gears.

For Alloy Steel AISI E9310, request a quote online or contact your nearest Titanium Industries location. Alloy data on this page is for reference only, not for design.

Weight Calculator

Alloy Steel AISI E9310 is a vacuum degassed, carburizing steel alloy that is suitable for heavy sectioned components. E9310 demonstrates a high degree of hardenability, fatigue resistance, high core strength and hardness while also offering excellent ductility and toughness. Most applications for this material specify use in the carburized state, which increases wear and abrasion resistance.

Alloy Steel AISI E9310 Specifications:

Alloy Steel AISI E9310 Applications:

Aircraft structural components
Rocket motor cases
Armor plate
Pressure vessels
Gears

DISCLAIMER: Alloy data sheets are for reference only, not for design purposes.

Alloy Steel AISI E9310 | UNS# G93106 — Table 1
Chemical Composition
Fe 93.77 - 95.19%		Ni 3.0- 3.50%		Cr 1.0 - 1.40%		Mn 0.45 - 0.65%		Si 0.20 - 0.35%
Mo 0.080 - 0.130%		C 0.080 - 0.130%		S ≤ 0.025%		P ≤ 0.025%

Alloy Steel AISI E9310 | UNS# G93106 — Table 2
PHYSICAL PROPERTIES
Density (lbs/cubic in)	Electrical conductivity (% IACS)	Thermal conductivity (W/m-K)	Specific heat capacity (BTU/lb-°F)	Thermal expansion (µm/m-K)	Melting Point (°F)
0.284	-	-	-	-	-

Alloy Steel AISI E9310 | UNS# G93106 — Table 3
Mechanical Properties
Property	Minimum	Maximum
Yield Strength Range (Mpa)	-	450
Tensile Strength Range (Mpa)	-	820
Elongation	-	17.3%
Hardness, Brinell	-	-
Modulus of Elasticity (ksi) (E): -
Machineability General Index: -